Foodsaver Vacuum Sealer + 4 Heat-Seal Rolls/Bags

Hello, we apologize your product has fallen short of your expectations. We are always aiming for the highest quality of service and to take advantage of any opportunity we have to improve, therefore, to understand your feedback better, kindly reach out to us via the official website or by phone & chat Mon-Fri, 9 AM - 5 PM ET.
Thank you!
FoodSaver Consumer Care.

Hello
Thank you for taking your time to post this review.
We recommend to pre-freeze moist/soft food items to prevent moisture from compromising an effective vacuum/seal. These items include meats, fish, poultry, soft fruits, and blanched vegetables.
If you anymore questions or concerns please reach out to us directly via our official FoodSaver "Contact Us" website or through LiveChat. We’re available Mon.-Fri. 9am -5pm Eastern Time.

Thank you and please stay safe!
FoodSaver Consumer Care

Hello!

Please find below a few suggestions, which could help you with the mentioned issue:

1. Check the upper and lower gaskets of the machine. If either of these is damaged or dirty, the unit will not vacuum properly. Clean any food materials from the gaskets. If removable, flip gaskets over and gently reinsert.

2. Leave the unit open for 20 minutes. This will allow for the gaskets to expand to their normal size. If the appliance is left unused and closed for a long time the gaskets may deform.

3. Sometimes when the bag is quite full and the bag is inserted into the vac position, close the lid, the lid closing pushes the bag out a little. This causes it to sit outside the vac position. Remove bag and ensure there is at least 3" of space between the top of the food and the end of the bag. Wipe any food material at the top of the bag. Try a smaller portion.

4. Remove any wrinkles by gently stretching the bag along the sealing strip.

5. Make sure the open end of the bag is resting entirely inside the Vacuum Channel. Try to curve it down into the drip tray.

6. Check the bag for leaks. Seal the bag with some air in it. Submerge it in water and apply pressure. Bubbles indicate a leak. If the bag has a leak, a new bag is needed.

7. Place the textured side of the bag facing downward.

8. For best results, pre-freeze meat and fish for 1-2 hours before vacuum sealing in a FoodSaver ®Bag. This helps retain the juice and shape, and guarantees a better seal. If it’s not possible to pre-freeze, place a folded paper towel between meat or fish and top of bag, but below seal area. Leave paper towel in bag to absorb excess moisture and juices during vacuum sealing process.

If you have any more questions, please reach out to us directly via our official FoodSaver "Contact Us" website or through LiveChat. We’re available Mon.-Fri. 9am -5pm Eastern Time.

Thank you!
FoodSaver Consumer Care