Mastercraft Auto Hammer, 12V

So far this is great Product...It pound down the nail so fast that , if i had to use a hammer it would took me 1min longer. Also i got this product when it was on sale for $44.50 taxes included. the only thing i fear is the battery life...

This hammer saves you time in the tight spots or on trim that you dont want to miss the nail on with a regular hammer and hit the wood. I like it just for that job when we changed all our baseboards alone.

La pile se décharge et vous ne pouvez plus continuer le travail pour 25-30 minutes. Il faudrait deux piles incluses à l'origine. Outil correcte pour une utilisation de courte durée tel qu'un meuble à monter. Cependant, manque de puissance pour les clous de grande taille. Je ne le recommanderait pas à un travailleur de la construction et pour les autres, c'est un peu cher pour l'utilisation qui peut en être fait.

I was repairing my fence and I was having difficulty hammering the strip of wood overhead( kept smashing the wood) so I thought of the Mastercraft auto hammer that I bought months before and I was very surprised it did the job really well and easily. The nail I was using was 1 3/4" galvanized. For difficult hammering job, this will be my constant companion. I liked it so much, I used the hammer in the entire project.

The Mastercraft 12V Lithium-ion Auto Hammer (054-1257-6) is similar, in concept, to a pneumatic palm nailer. Rather than compressed air, a 12V lithium-ion battery drives a small piston within a sleeve, delivering 3,600 impacts per minute. The tool is activated with a single speed trigger. The Auto Hammer is about 10" long, and weighs just over 1 3/4 pounds (with battery installed). While it's fairly light, the placement of the trigger forces you to grip the Auto Hammer forward, toward the head. I find that this makes the tool feel off-balance. Also, persons with smaller hands might find the handle bulky. There is no conventional 'on/off' switch; rather, the Auto Hammer uses a pressure switch. Press the power switch and the tool engages at maximum power. You have to keep the trigger depressed while running the tool; there is no lock-on feature. As well, if you inadvertently press the power switch while carrying the tool, or if the switch comes into contact with anything on your workbench or in you tool box, it will start up. There is a bright white LED work light just above the trigger that makes it easy to see where you're nailing. The magnetic sleeve is 7/16" wide; which means that, theoretically, you can use nails with a head diameter of up to 7/16". The magnet is not very strong; it will barely hold a 6d nail, and won't hold a 10d or larger nail. I was able to use the Auto Hammer to fully set 6d and smaller nails in softwood, to almost set 7d and 8d nails, but could only partially set 10d and larger nails. I also tried setting nails in hardwood and plywood. You can set smaller 2d to 4d nails in hardwood and 2d to 6d nails in plywood. Don't bother with longer nails. The weak magnet barely holds a 6d nail. It won't hold (or full sink) 10d or larger nails One thing you need to be aware of is that the Auto Hammer is incredibly loud. I measured it at 115.4 decibels. Using this tool without adequate hearing protection would be committing aural suicide. In it's present configuration you can use it to set small nails in cramped areas where swinging a hammer isn't feasible. However, for it to be a really useful, Mastercraft needs to do some refinement on the tool. A stronger magnet, possibly a smaller diameter sleeve, proper on/off switch, more power to full set at least 10d nails, and lower noise level.