Obtenez votre commande dès aujourd’hui. Ramassage* ou Livraison** disponible le jour même.

En savoir plus
NOTRE MAGASIN

Crédit Offert* EN SAVOIR PLUS

Soutien État de commande
EN

Fluidmaster

Joints d'étanchéité de toilette Fluidmaster Better Than Wax

#063-0571-0
15,99 $
Mieux notés
Achetez-le en ligne :
Ramassage à Leduc, AB
20 En stock
Obtenez-le dès aujourd’hui!

Ramassage disponible à 19 h 00, 09 mars

Quantité mise à jour à 1
Nouveaux paiements numériques disponibles à la page de paiement
Trouvez-le également en magasin:
20 en stock au Leduc, AB
Allée 51
Ajouter au registre

À l'attention des personnes résidant au Québec: pour obtenir des renseignements sur l'entretien et la réparation, cliquez ici.

Fluidmaster

Fluidmaster

Joints d'étanchéité de toilette Fluidmaster Better Than Wax

15,99 $

Produit Détails

Le joint de toilette Fluidmaster Better Than Wax facilite l'installation de la toilette. Ce joint de cuvette convient à n'importe quelle combinaison de bride et de toilette, offrant plus de commodité grâce à sa capacité de repositionnement impressionnante. La quincaillerie antirouille et les boulons en laiton de l'ensemble assurent la durabilité du joint. Procurez-vous ce joint pour une mise à niveau sans tracas de votre toilette.

  • Joint de toilette fonctionnant au-dessus du sol, au-dessous du sol et sur les surfaces inégales

  • Joint d’étanchéité pouvant être utilisé lors d’application au-dessus et en-dessous du sol et sur les surfaces inégales

  • Solution supérieure qui élimine le besoin de cire, réduit le temps des réparations et fournit un joint étanche aux gaz, aux odeurs et à l’eau

  • Avec boulons et fixations en laiton qui ne rouillent pas

  • Joint de toilette sans cire ni dégâts et dont la submersion ne créera aucune fuite

  • Convient aux lignes de déchets de 3 po (8 cm) et 4 po (10 cm)

  • Facile à installer

  • Facile à repositionner

  • No de modèle : 7530CP8

Numéro de modèle de l’article 7530CP8
Type de pièce de plomberie Joint
Fini Satiné, Noir, Laiton
Matériau principal Caoutchouc
Couleur Bleu
Pour modèle/marque Universal|3" and 4" waste lines
Nombre de pièces 8
Fonctionnalités avancées Résistant à la rouille
Hauteur une fois assemblé (po) 2,00 po
Longueur une fois assemblé (po) 5,50 po
Largeur une fois assemblé (po) 5,50 po
Poids une fois assemblé (lb) 0,53 lb
Warranty:
  • Garantie : Garantie limitée du fabricant, 10 ans
Commande en ligne
  • Le ramassage est gratuit dans la plupart des magasins (certains magasins exigent un montant minimum de commande avant taxes).
  • Les tarifs d’expédition dépendent de la taille et du poids des articles, ainsi que de la distance entre l’adresse de livraison et le magasin.
  • La livraison le jour même coûte 9,99 $ par commande.
  • Informations sur une commande en ligne
Retours
  • La plupart des articles peuvent être retournés ou échangés dans tous les magasins Canadian Tire dans les 90 jours suivant l’achat.
  • Certains articles ne sont pas remboursables ni échangeables.
  • La politique de retour décrite ci-dessus peut ne pas s’appliquer à l’article que vous consultez présentement. Pour obtenir tous les détails et connaître les critères d’admissibilité, veuillez consulter notre Politique de retour pour connaître les exceptions.

Comparer des articles semblables

Only Show Differences
Ratings
Type de pièce de plomberieJoint
FiniSatiné, Noir, Laiton
Matériau principalCaoutchouc

Évaluations

Sommaire de la notation

Sélectionner une ligne pour filtrer les commentaires
86 commentaires avec 5 étoiles.
23 commentaires avec 4 étoiles.
3 commentaires avec 3 étoiles.
3 commentaires avec 2 étoiles.
12 commentaires avec 1 étoile.

Note générale

4.3
45 commentateurs sur 55 (82%) recommandent ce produit

Évaluez ce produit

Sélectionnez pour évaluer l'article à 1 étoile. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 2 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 3 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 4 étoiles. Cette action ouvrira le formulaire de soumission.
Sélectionnez pour évaluer l'article à 5 étoiles. Cette action ouvrira le formulaire de soumission.
Pour ajouter un avis, vous devrez fournir une adresse courriel valide à des fins de vérification.

Images et vidéos du client

Filtrer les avis

  • installation
  • facilité d'utilisation
  • achat
  • la satisfaction
  • instructions
  • prix
  • qualité
  • odeur
1 to 5 sur 127 commentaire
1 – 5 sur 127 commentaire

Worked perfectly and stopped leak

il y a 14 jours
Better than wax by far. Took 10 min to unscrew the toilet, clean the old wax away and pop this in. Stopped leak immediately.
Traduire avec Google

Oui, Je recommande ce produit.

Utile?

NOT universal fit !! Rating “-2 Stars”. 6 hour rework 😡

il y a 29 jours
I have installed about two dozen toilets in my time. Always used simple wax rings, and replace them every five years because they can dry up and leak and believe me you don’t want to live through that. So when I saw this product, I thought it was a great idea, and scooped up a pair of them. But the dream quickly turned into a nightmare. Standard toilet flanges are either 3 1/2 or 4 inch diameter. The product said it was universal and so I thought I would be fine. Wrong. I did not need the extra spacer, so just mounted the seal onto my 3 1/2 inch floor flange. I lowered the toilet carefully onto the seal, but it did not allow the toilet to properly seat down into position, such that the base of the toilet was not touching the floor. I thought perhaps I would just have to use the mounting bolts and nuts to nudge the fixture into place. I carefully and slowly tightened the nuts, alternating sides. I started to get nervous when I realized I was turning the nuts further down the threads than with my previous wax ring. But it seemed clear I needed to continue tightening, as the toilet fixture was still not touching the floor and was very wobbly. I hesitantly continued 1/4 turn at a time until, POP - the PVC floor flange broke. This caused a six hour rework! Jigsaw with a long blade to score into the sides of the internal wall of the floor flange without damaging the drain pipe into which it is glued. Then an hour of chipping the internal neck of the flange away from from the drain pipe, again being careful not to damage it. And then, after all that, had to go back to the store and buy wax rings which installed easily and sealed perfectly with no trouble. This product may be perfectly fine with a 4 inch drain, but it’s impossible to use with a 3 1/2 inch drain, which many houses have.
Traduire avec Google

Non, Je ne recommande pas ce produit.

Utile?
Réponse de FluidmasterSupport :
il y a 28 jours
FluidmasterSupport
A tip from Fluidmaster that may provide a solution for this issue. In cases where the flange is above the floor or your toilet has a shallow gap it may be better to build up the floor using toilet base plates or shim the toilet rather than using wax. By adding height around the flange this will allow for a proper sealing bead around the ceramic and floor flange which will not break the seal during normal use or plunging of the toilet. Wax will spread but it may spread so thin that the sealing bead around the floor flange will break during normal use or plunging. For additional information or help with your product contact Fluidmaster’s Technical Service Department as we are available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011. FluidMaster

May as well flush your cash

il y a un mois
Doesn't work. Leaks like there is no seal at all.
Traduire avec Google
Utile?
Réponse de FluidmasterSupport :
il y a un mois
FluidmasterSupport
Fluidmaster would like the opportunity to learn more and provide help. To get help visit our website Fluidmaster.com where you can find product information and email or chat with a technician. Our toll-free number is 800-631-2011 and we are available 5 days a week Mon-Fri from 5:30 am – 5:00 pm PST. FluidMaster

I’ll never go back

il y a un mois
I will NEVER go back to using a wax ring. Used this on both toilet replacements. No issues. Super easy.
Traduire avec Google
Utile?

Better mouse trap than a wax seal

il y a 3 mois
This is a way better product than traditional wax seals. Easy install with a simple to understand video on what to expect when doing the install.
Traduire avec Google
Utile?
1 – 5 sur 127 commentaire

Questions

1 - 1 à 1 question

Q : Does the fluid master toilet gasket kit mentions it fits 3" and 4" waste pipes. Is the 3'' an inside diameter or outside diameter on the gasket kit itself

il y a 2 ans
Traduire avec Google
2 Réponses
  • R : Typically pipes are measured as inside diameter.  3" Pipe having an ID of 3" nominal (3.075") and the pipe itself OD is 3.5".  For 4" pipe it is 4.033 ID and 4.5" OD.  The way the neck on this flange kit works is it fits inside the waste pipe.

    il y a 2 ans
    Utile?
    Traduire avec Google